Maintenance-free

Pressure stability
Deformation in the rubber leads to higher wear and reduces pressure stability more quickly,
with the holding pressure in the chambers, backflow occurs in the stator.

Operating temperature
Friction causes heat and this has a negative impact on the rubber of the stator.
It is therefore important to reduce the heat in the stator by using a suitable rubber compound and through fast heat dissipation.
Irregular rubber thicknesses prevent fast heat transmission.

Pre-stress and pump's operating range
Maintenance-free stator "Ready-to-go" – pre-stressed for immediate use.

SD 6-3 slimline
Machine model: G 4 (230V) (1), RITMO XL (230V) (1), SWING L (230V) (2)

• Gypsum / gypsum lime plaster (1)
• Light plaster (1)
• Lime-cement render < 3 mm (1)
• Insulating plaster (1)
• Adhesive mortar (1)
• Reinforcing mortar (1)
• Frame grouting mortar (1)
• Finishing coats, mineral (1)
• Finishing coats, pasty (1)
• Loam plaster, dry (1)
• Fire protection mortar (1)
• Thin screed
• Floor fillers (1)
• Building site mixture (1)

SD 6-3 slimline soft
Machine model: G 4 (230V) (1), RITMO XL (230V) (1), SWING L (230V) (2), RITMO L plus (5)

• Gypsum / gypsum lime plaster (5)
• Light plaster (5)
• Lime-cement render < 3 mm (5)
• Insulating plaster (5)
• Lime-cement render > 3 mm (5)
• Adhesive mortar (5)
• Reinforcing mortar (5)
• Frame grouting mortar (5)
• Finishing coats, mineral (5)
• Finishing coats, pasty (5)
• Fine filler, pasty (5)
• Loam plaster, dry (5)
• Fire protection mortar (5)
• Thin screed (5)
• Floor fillers (5)