Knauf PFT Knauf PFT

Rotor/stator 2 L 8

Rotor/stator 2 L 8 with clamp

The heart of a mixing and delivery pump is the pump unit, also known as the rotor/stator. This is where the required pressure is built up in order to deliver the material to the processing location. Depending on the size, different conveying outputs can be provided. The last digit of the pump designation denotes the number of pressure stages; a working pressure of 10 bar can be built up for each stage. If these values are no longer achieved, the unit is worn out and should be replaced.

  • Clampable

Details

Clampable

  • Pressure stability
    Deformation in the rubber leads to higher wear and reduces pressure stability more quickly,
    with the holding pressure in the chambers, backflow occurs in the stator.
  • Operating temperature
    Friction causes heat and this has a negative impact on the rubber of the stator.
    It is therefore important to reduce the heat in the stator by using a suitable rubber compound and through fast heat dissipation.
    Irregular rubber thicknesses prevent fast heat transmission.
  • Pre-stress and pump's operating range
    "Do-it-yourself" – the tension is adjusted using screws; retightening is possible to suit your needs.
    This means that this stator can be tuned by a professional to match the application or the material.

2 L 8 with clamp
Machine model: ZP 3 XXL

  • Masonry mortar
  • Fire protection mortar
  • Concrete restoration mortar
  • Floor screed 120 l
  • Building site mixture

Downloads

Please find further downloads and languages here.

Description Edition Document type
DS138_en PFT Rotor/Stator programme Nov. 2018 Brochure
PDF

Technical data

  • SOLVER 2 L 8 with clamp  Produktbild

    SOLVER 2 L 8 with clamp

    Stator SOLVER 2 L 8 with clamp
    Part no. 00478798

    Rotor without tang
    Part no. 00761595

    for machine model:
    ZP 3 XXL

    Direction of rotation:
    Anti-clockwise rotating

    Colour code:
    White

    Working pressure
    25 bar

    Stator length / Ø:
    655 mm / 191 mm

    Max. grain size:
    10 mm

    Output at 400/200 rpm:
    560 | 280 l/min

    Connection type:
    L

    Rubber hardness:
    Soft

    Conveying distance:
    up to 150 m with DN65 (ZP 3 XXL)

    Accessories:
    Tie rod of L-pump 680 mm
    Part no. 00103781

    Show more

Video